DNC-PS700-A10 | DUSTRONIX Pressure Differential Meter

The DUSTRONIX Pressure Differential Meter is designed to interface with NCC dust collector controls as well as other controllers. This meter is capable of measuring differential pressure and displaying that value in both analog bar graphs and digital displays. Both Low/High Cleaning and Low/High Alarm setpoints can be programmed with relay outputs. The Cleaning relay will energize when the measured pressure exceeds the High Cleaning Setpoint and will de-energize when the pressure goes below the Low Cleaning Setpoint. The Alarm relay will energize whenever the measured pressure exceeds the High or Low Alarm Setpoint. The DUSTRONIX Pressure Differential Meter will accept either a 0 to 10" w.c. pressure input or a 4 to 20 mA input. A 4 to 20 mA output loop is provided when the internal pressure sensor is used. A 3-digit security code is also provided to prevent unauthorized changes. The meter is equipped with non-volatile memory which will store all operating parameters when power is removed.

FEATURES

• 51-element tri-color LED meter movement
• P control relay output: programmable, normally open, or normally closed
• P alarm relay output: programmable, normally open, or normally closed
• Cleaning status LED
• Alarm status LED
• 0-10" w.c. P range
• Source or sink 4 to 20 mA P output
• 1/4 DIN panel mountable
• NEMA 4 compatible
• 3-digit, 7-segment alpha-numeric display
• Removable finger-safe terminations
• Replaces most popular P switches/ gauges
• Non-volatile memory
• User-selectable program access code
• Universal input voltage Programmable Parameters:
• Alarm Low/High setpoints
• Cleaning Low/High setpoints
• Alarm relay (normally open or normally closed)
• Cleaning relay (normally open or normally closed)
• Units of measure (inches, w.c. or kPa)
• Security code (user settable)
• P offset compensation capability

Download

Brochure